Note: If you purchase more than 10 pieces you are eligible to be listed as a reseller at the official website.
The I-Pmart 2 in 1 Box With Smart Card Holder, has all the same functions as the UniBox v2.1 and I-Pmart 2 In 1 Box, but with the extra feature that you can put the smart card yourself such as Infinity and Vygis card. And it also comes with a new look.
- Based on Maxim 3232, very important for new phones
- Indication LED`s for TX, RX, RTS, CTS, Power, Flash Supply
- Uses RJ45 Plug for connecting the needed Phone cable
- You can manually switch between FBUS and MBUS
- Optional 5V test voltage for flashing some Phones like
The package doesn't includes software. You will be required to look for the software yourself from the internet.
Trium and Ericsson
- It gets external supplied so it works also on Laptops and
with Softwares that doesn't enable the power
- Power supply should be between 7-9 V DC
- Support also for the remote unlock service
1. For the pinouts configuration, please kindly visit from
the schematic diagram of the different datacables respectively in
order to determine if there is right for the sw used or contact
our recommended source shown at left hand side.
2. No AC/DC transformer incl. in the unibox. User can try
with the private owned power supply or a 9V battery cell with the
external power stabilizer.
Pinout of the RJ45 jacket:
1 = Switchable 5V Flash Supply
2 = TX (output, data to phone)
3 = RX (input, data from phone)
4 = RTS (output, data to phone)
5 = CTS (input, data from phone)
6 = M/C-BUS (bi-directional 1 wire bus)
7 = GND
8 = GND
Pinout of the RJ48 jacket:
1 = DCD (input)
2 = RxD (input)
3 = TxD (output)
4 = DTR (output)
5 = GND
6 = DSR (input)
7 = RTS (output)
8 = CTS (input)
9 = RI (input)
10 = +5V
(DCD & RxD are internally connected)
Connect the box to your PC and connect the power supply to it, the Power LED will light up as soon as you have connected it. Choose now the operating mode and connect the phone cable and the phone.
Please download the driver from
* Sales package content may vary and might change without notification.